[. . . ] Without partition Before you begin Please read all instructions in this manual, as well as the manual which accompanied your machine, before installation and use. This appliance is top-heavy and must be secured to prevent the possibility of tipping forward. [. . . ] This appliance is top-heavy and must be secured to prevent the possibility of tipping forward. Keep the doors closed until the appliance is completely installed and secured per the installation instructions. To reduce the risk of injury or damage to the product, two people should be used for installation. If the appliances are installed directly next to each other (without a partition), they need to be attached together. With partition The minimum thickness of the partition is 5/8" (16 mm). ^ Insert the pins into the upper holes, while keeping the heating mat away from the bottom of the appliance c. ^ Press on the heating mat from top to bottom, and insert the lower pins into the holes d. ^ Hang the cable cover by its hinge on the heating mat and, from below, push into the screws k. 6 en Connect the appliances ^ Push the appliances together until the hinge halves interlock. ^ Once the appliances have been pushed together, insert the metal bracket into the upper and lower plates. [. . . ] ^ Hang the cable cover by its hinge on the heating mat and, from below, push into the screws k. 6 en Connect the appliances ^ Push the appliances together until the hinge halves interlock. [. . . ]